Chemists invented PFAS within the Nineteen Thirties to make life easier: Nonstick pans, waterproof clothing, grease-resistant food packaging and stain-resistant carpet were all made possible by PFAS. But in recent times, the growing variety of health risks found to be connected to those chemicals has change into increasingly alarming.
PFAS – perfluoroalkyl and polyfluoroalkyl substances – at the moment are either suspected or known to contribute to thyroid disease, elevated cholesterol, liver damage and cancer, amongst other health issues.
They might be present in the blood of most Americans and in lots of drinking water systems, which is why the Environmental Protection Agency in April 2024 finalized the first enforceable federal limits for six sorts of PFAS in drinking water systems. The limits – between 4 and 10 parts per trillion for PFOS, PFOA, PFHxS, PFNA and GenX – are lower than a drop of water in a thousand Olympic-sized swimming pools, which speaks to the chemicals’ toxicity. The sixth type, PFBS, is regulated as a combination using what’s generally known as a hazard index.
Meeting these recent limits won’t be easy or low cost. And there’s one other problem: While PFAS might be filtered out of water, these “endlessly chemicals” are hard to destroy.
My team on the University of Notre Dame works on solving problems involving contaminants in water systems, including PFAS. We explore recent technologies to remove PFAS from drinking water and to handle the PFAS waste. Here’s a glimpse of the magnitude of the challenge and ways you possibly can reduce PFAS in your personal drinking water:
Removing PFAS will cost billions per yr
Every five years, the EPA is required to decide on 30 unregulated contaminants to watch in public drinking water systems. Right now, 29 of those 30 contaminants are PFAS. The tests provide a way of just how widespread PFAS are in water systems and where.
The EPA has taken over 22,500 samples from about 3,800 of the 154,000 public drinking water systems within the U.S. In 22% of those water systems, its testing found not less than one in all the six newly regulated PFAS, and about 16% of the systems exceeded the brand new standards. East Coast states had the most important percentage of systems with PFAS levels exceeding the brand new standards in EPA tests conducted to this point.
Under the brand new EPA rules, public water systems have until 2027 to finish monitoring for PFAS and supply publicly available data. If they find PFAS at concentrations that exceed the brand new limits, then they have to install a treatment system by 2029.
How much that may cost public water systems, and ultimately their customers, continues to be an enormous unknown, but it surely won’t be low cost.
The EPA estimated the fee to the nation’s public drinking water systems to comply with the news rules at about US$1.5 billion per yr. But other estimates suggest the whole costs of testing and cleansing up PFAS contamination shall be much higher. The American Water Works Association put the fee at over $3.8 billion per yr for PFOS and PFOA alone.
There are greater than 5,000 chemicals which are considered PFAS, yet only a number of have been studied for his or her toxicity, and even fewer tested for in drinking water. The United States Geological Survey estimates that nearly half of all tap water is contaminated with PFAS.
Some money for testing and cleanup will come from the federal government. Other funds will come from 3M and DuPont, the leading makers of PFAS. 3M agreed in a settlement to pay between $10.5 billion to $12.5 billion to assist reimburse public water systems for a few of their PFAS testing and treatment. But public water systems will still bear additional costs, and people costs shall be passed on to residents.
Next problem: Disposing of ‘endlessly chemicals’
Another big query is easy methods to eliminate the captured PFAS once they’ve been filtered out.
Landfills are being considered, but that just pushes the issue to the following generation. PFAS are generally known as “endlessly chemicals” for a reason – they’re incredibly resilient and don’t break down naturally, in order that they are hard to destroy.
Studies have shown that PFAS might be broken down with energy-intensive technologies. But this comes with steep costs. Incinerators must reach over 1,800 degrees Fahrenheit (1,000 Celsius) to destroy PFAS, and the potential of creating potentially harmful byproducts is not yet well understood. Other suggested techniques, akin to supercritical water oxidation or plasma reactorshave the identical drawbacks.
So who’s accountable for managing that PFAS waste? Ultimately the responsibility will likely fall on public drinking water systems.
The EPA on April 19, 2024, designated PFOA and PFOS as eligible contaminants for Superfund statuswhich implies corporations which are accountable for contaminating sites with those chemicals might be required to pay for cleanup. However, the EPA said it didn’t intend to go after wastewater treatment plants or public landfills.
Steps to guard your property from PFAS
Your first instinct is likely to be to make use of bottled water to attempt to avoid PFAS exposures, but a recent study found that even bottled water can contain these chemicals. And bottled water is regulated by a unique federal agency, the Food and Drug Administration, which has no standards for PFAS.
Your most suitable choice is to depend on the identical technologies that treatment facilities shall be using:
-
Activated carbon is analogous to charcoal. Like a sponge, it should capture the PFAS, removing it from the water. This is identical technology in refrigerator filters and in some water pitcher filters, like Brita or PUR. Note that many refrigerator manufacture’s filters are usually not certified for PFAS, so don’t assume they may remove PFAS to secure levels.
-
Ion exchange resin is identical technology present in many home water softeners. Like activated carbon, it captures PFAS from the water, and you’ll find this technology in lots of pitcher filter products. If you choose for a whole house treatment system, which a plumber can attach where the water enters the home, ion exchange resin might be the most effective selection. But it is pricey.
-
Reverse osmosis is a membrane technology that only allows water and choose compounds to go through the membrane, while PFAS are blocked. This is usually installed on the kitchen sink and has been found to be very effective at removing most PFAS in water. It shouldn’t be practical for whole house treatment, but it surely is prone to remove plenty of other contaminants as well.
If you will have a personal well as an alternative of a public drinking water system, that doesn’t mean you’re secure from PFAS exposure. Wisconsin’s Department of Natural Resources estimates that 71% of shallow private wells in that state have some level of PFAS contamination. Using an authorized laboratory to check well water for PFAS can run $300-$600 per sample, a price barrier that may leave many private well owners at midnight.
For all of the treatment options, be sure that the device you select is certified for PFAS by a good testing agencyand follow the advisable schedule for maintenance and filter substitute. Unfortunately, there may be currently no secure approach to eliminate the filters, in order that they go within the trash. No treatment option is ideal, and none is prone to remove all PFAS right down to secure levels, but some treatment is best than none.
This article, originally published April 17, 2024, has been updated with EPA’s Superfund declaration.